Quick Jump Menu
Categories
There are no subcategories in this category.
1 Dimensions for Custom Embers Burner (CXF) with Valve Vanisher

The attached drawings show the Minimum Recommended Fireplace dimensions for centering the Valve Vanisher assembly into a fireplace, while leaving sufficient space for air flow to promote cooling and longevity of the heat-sensitive control system. The drawing…

2 Dimensions for Custom Pan Burners (CS) with Valve Vanisher

The attached drawings show the Minimum Recommended Fireplace dimensions for centering the Valve Vanisher assembly into a fireplace, while leaving sufficient space for air flow to promote cooling and longevity of the heat-sensitive control system. The drawing…

3 Dimensions for Double Face Burner (DF-CF) with Valve Vanisher

The attached drawings show the Minimum Recommended Fireplace dimensions for centering the Valve Vanisher assembly into a fireplace, while leaving sufficient space for air flow to promote cooling and longevity of the heat-sensitive control system. The drawing…

4 Dimensions for Fire Line Burner (FLB, FGV, FDV) with Valve Vanisher

The attached drawings show the Minimum Recommended Fireplace dimensions for centering the Valve Vanisher assembly into a fireplace, while leaving sufficient space for air flow to promote cooling and longevity of the heat-sensitive control system. The drawing…

5 Dimensions for Flaming Ember Burner (F) with Valve Vanisher

The attached drawings show the Minimum Recommended Fireplace dimensions for centering the Valve Vanisher assembly into a fireplace, while leaving sufficient space for air flow to promote cooling and longevity of the heat-sensitive control system. The drawing…

6 Dimensions for Flaming Ember XTRA Burner (FX) with Valve Vanisher

The attached drawings show the Minimum Recommended Fireplace dimensions for centering the Valve Vanisher assembly into a fireplace, while leaving sufficient space for air flow to promote cooling and longevity of the heat-sensitive control system. The drawing…

7 Dimensions for Multi-Burner (LC) with Valve Vanisher

The attached drawings show the Minimum Recommended Fireplace dimensions for centering the Valve Vanisher assembly into a fireplace, while leaving sufficient space for air flow to promote cooling and longevity of the heat-sensitive control system. The drawing…

8 Dimensions for Tipi / Andiron Burner (TNA) with Valve Vanisher

The attached drawings show the Minimum Recommended Fireplace dimensions for centering the Valve Vanisher assembly into a fireplace, while leaving sufficient space for air flow to promote cooling and longevity of the heat-sensitive control system. The drawing…

9 Instructions for GV60-WS1 Wired Wall Switch for VEI and EI controls

Attached are the instructions for the GV60-WS1 Wired Wall Switch, which may be used with VEI and EI controls. It includes a 26 feet long harness cable which connects the VEI/EI receiver/ignition module to the included key pad. The key pad may be mounted into…

10 Location of Battery Pack in VEI Systems

All of our Valve Vanishers with Electronic Ignition are powered by four (4) AA Batteries that are installed into a separate battery holder that is connected to the control module with a 48" long wire. This allows the batteries, which discharge at 135 degrees…

1 2 Next
Info Ask a Question