Custom
Pan Burner
The
Custom Pan Burner is a rectangular pan burner which can be installed
on legs or flush on the floor, using volcanic ash poured around the
burner to create a pit look. It
is available in the following sizes:
|
Model
#
|
Front
& Rear Width
|
Depth
|
Ht.
(no Legs)
|
Ht.
(with legs)
|
|
CS16
|
16
|
12
|
2
|
4.25
|
|
CS18
|
18
|
12
|
2
|
4.25
|
|
CS21
|
21
|
12
|
2
|
4.25
|
|
CS24
|
24
|
12
|
2
|
4.25
|
|
CS27W
|
27
|
16
|
2
|
4.25
|
|
CS30
|
30
|
12
|
2
|
4.25
|
|
CS33W
|
33
|
16
|
2
|
4.25
|
|
CS36
|
36
|
16
|
2
|
4.25
|
|
CS42
|
42
|
16
|
2
|
4.25
|
|
CS48
|
48
|
16
|
2
|
4.25
|
|
CS54
|
54
|
16
|
2
|
4.25
|
|
CS60
|
60
|
16
|
2
|
4.25
|
Additional
sizes and shapes can be custom designed to fit a particular firebox’s
dimensions.
The
Custom
Pan Burners
are made of heavy 16-gauge steel, with ½” schedule 40 pipe (not
light duty tubing) for the main burner tube, with internal baffling
to spread the gas and flame across the burner. All seams are welded
for maximum performance and durability.
Custom Pan Burners are also available in 304 Stainless Steel with 1/2" schedule 10 SS pipe in the same design as the black.
There are two leg choices: (1) Round (shown in below photo) (add "-SR" to the above item numbers); or (2) Strap (same design as the black photo above, but in SS) (add "-SS" to the above item numbers).
Ask a Question 
