Custom Pan Burner ( CS ) Specifications and Dimensions
Author: Rett Rasmussen Reference Number: AA-00509 Views: 6464 Created: 2011-06-11 11:03 Last Updated: 2016-03-29 14:00 0 Rating/ Voters

Custom Pan Burner




The Custom Pan Burner is a rectangular pan burner which can be installed on legs or flush on the floor, using volcanic ash poured around the burner to create a pit look. It is available in the following sizes:


Model #

Front & Rear Width

Depth

Ht. (no Legs)

Ht. (with legs)

CS16

16

12

2

4.25

CS18

18

12

2

4.25

CS21

21

12

2

4.25

CS24

24

12

2

4.25

CS27W

27

16

2

4.25

CS30

30

12

2

4.25

CS30W

30

16

2

4.25

CS33W

33

16

2

4.25

CS36

36

16

2

4.25

CS42

42

16

2

4.25

CS48

48

16

2

4.25

CS54

54

16

2

4.25

CS60

60

16

2

4.25


Additional sizes and shapes can be custom designed to fit a particular firebox’s dimensions.


The Custom Pan Burners are made of heavy 16-gauge steel, with ½” schedule 40 pipe (not light duty tubing) for the main burner tube, with internal baffling to spread the gas and flame across the burner. All seams are welded for maximum performance and durability.  


Custom Pan Burners are also available in 304 Stainless Steel with 1/2" schedule 10 SS pipe in the same design as the black.  

There are two leg choices: (1) Round (shown in below photo) (add "-SR" to the above item numbers); or (2) Strap (same design as the black photo above, but in SS) (add "-SS" to the above item numbers - only available for 30" and smaller burners).



Attachments
CS.SPEC.1206.pdf 50.5 Kb Download File
Rss Comments
  • There are no comments for this article.
Info Add Comment
Nickname: Your Email: Subject: Comment:
Quick Jump Menu
Info Ask a Question