|
|
The pilot is lit but when I press the transmitter, the burner will not light. What is wrong and what do I need?
| Author: Rett Rasmussen Reference Number: AA-00419 Views: 1151 Created: 2011-01-31 22:10 Last Updated: 2011-01-31 22:11 |
0 Rating/ Voters
|
 |
Q: The pilot is lit but when I press the transmitter, the burner will not light. What is wrong and what do I need? A: Here are several things for you to check and try: 1) After lighting the pilot, did you turn the knob from the PILOT to the ON position? No gas will flow through the valve if you did not. 2) Are the batteries in the receiver and transmitter fresh? If the light on the hand-held transmitter is strong when you push the button, then you may only need to replace the batteries in the transmitter (they use much more energy than the transmitter). 3) Have you synchronized the transmitter to the receiver? Depress the learn button on the receiver until you hear a beep, then depress the ON button on the transmitter until you receive three confirming beeps from the receiver.
|
| |
|
|
| |
|
|
|
|
|
Ask a Question 
